|
The SafeC 400 safety relay from
CEDES is the newest technological generation of evaluation modules, which ensure the simultaneous monitoring of the most varied safety components.
The SafeC 400 offers everything that is required for the safe use of a machine: Up to 10 safety components like emergency STOP button, light curtain, scanner etc. can be connected to a
SafeC 400. But that is not all: with the integrated force guided and redundant relays (up to 8 electrically isolated circuits)
SafeC 400 can switch direct loads of up to 1’100 VA per circuit!
SafeC 400 is also available with monitored semiconductor safety outputs which energize and monitor external contactors.
For some manufacturing processes it is important that the process not be interrupted even during an emergency stop. It may be safer, for example, to first slow down the machine and then initiate a controlled stop. With the
SafeC 400, the separate output blocks may be configurated with specific time delays. This for example allows one safety output signal to discontinue a process, and a second safety output signal, time delayed, to activate a physical stop.
|
- small handling robots
- conveyor industry
- presses
- robot cells
- production lines
- indexing tables
- entry / Access systems
|
-
monitoring of light curtains, more emergency stop buttons and
door-switches as well as an override switch
-
two
interdependent safety circuits with adjustable delay time
-
mode of operation easily configurable
(Safety
Configurator SafeC 400)
-
different Blanking types
-
automatic and manual start
-
RS
485 interface for simultaneous height measuring
-
OptiLink interface
-
outputs: up to 8 NO contact
-
PNP output
|
-
safety category 4
-
connection
for safety light curtains, emergency stop buttons and door safety
switches in one
compact device
-
configuration
easily modifiable
-
optical interface for diagnostic purposes
-
numerous status outputs for connection to SPS
|
