|
The Safe C is an extremely compact safety evaluation module, which takes over the simultaneous monitoring of different safety components. This safety module distinguishes itself with
either three or four independent safety output blocks.
For applications with many different peripheral devices, an additional terminal module is available with which up to 15 two-channel safety components can be monitored. It is simple for
authorized persons to reconfigure certain factory settings of the relay module, in order to be able to
customize their individually desired conditions or applications whenever they wish. The configurable logic sets are implemented during the development phase and are activated or deactivated by the customer during configuration. So with the same system, a quick adjustment for various equipment can be made. The configuration of the
SafeC module is carried out using the optical interface “OptiLink”.
|
- conveyor systems
- presses
- robot cells
- production lines
- rotating machines
- access and entry control
| Number
of safety components |
Category
2 |
Category
4 |
| Standard
device |
12 |
6 |
| With terminal extension |
30 |
15 |
|
- High-performance force guided NO contacts
- Up to 8 contacts per evaluation module
- Up to 4 PNP - safety outputs per Safe C
- Up to 8 PNP - signal outputs for connection a PLC
- CAN Interface, electrically isolated
- RS 485 interface
- Compact and robust construction
- Optical interface for diagnosis
|
-
Safety category 2, 3 or 4 accord. EN 954-1
-
short response time
-
versatile applications
-
up to 15 two-channel cat. 4 safety components
connectable
-
cost-optimized, minimal amount of cabling
|
