The 2N LiftGate IoT gateway will transform a regular elevator into a modern IP solution for the 21st century. Plus, you needn’t worry if there’s a UTP cable in the elevator. IP connectivity in the elevator is secured using 2 wires in the travelling cable.
The APS is a contactless absolute positioning system for elevators. It supports speeds of up to 20 m/s and distances of up to 1,500 m. As SIL 3 rated, it can be used for safety-relevant functions.
The iDiscovery is a powerful SIL 3 and EN 81-20/50 compliant safety supervisor unit. In conjunction with CEDES’ APS (Absolute Positioning System), it takes over safety-relevant functions of the elevator.
This add-on for our light curtain cegard/Smart provides a clear visual signal on the elevator door status, warning passengers with red LEDs when the door begins to close.
The 2019 North American Elevator Safety Code (A17.1-2019 / B44-19; A17.1-2022 / B44-22) defines new and clarifies existing requirements for the means of detecting persons or objects between the doors (2D) or approaching the elevator (3D).
Know instantly if a cabin’s free - CabSens makes it happen. This real-time insight enables smarter, safer, and more efficient elevator usage across various scenarios.
The IMS 100 Pro provides a new level of safeguarding by monitoring the elevator entrance area. This reduces overall door-opening times and improves elevator efficiency.
The Universal Power Supply UPS Plus has two potential-free relay outputs and enables the simultaneous connection of two sensors. Input voltages can range from 20 to 265 VAC or 20 to 375 VDC.
The Universal Power Supply (UPS) offers a 24 V power supply for sensors, e.g. cegard/Mini. Input voltages ranging from 20 to 265 VAC or 20 to 375 VDC can be converted. The sensor’s semiconductor output will also be converted to a potential-free relay contact.
