Products for


From ultra-reliable sensor solutions for elevators to a complete portfolio for industrial door safeguarding – find the right product for your demanding application here. 

Product search:

Sensing edges

Optical Sensing Edges (OSE, Cat.3)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

Optical Sensing Edges (OSE, Cat.4)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

Optical Sensing Edges (OSE, UL)

Safety edges are used wherever moving edges pose a hazard to people. The hazardous areas are protected by hollow rubber profiles. As soon as a person or object touches them, the sensing profile is deformed, and the potentially hazardous movement stops.

TOF 3D sensors

TOF/Start

The TOF/Start detects people or objects approaching escalators, revolving and swing doors, industrial doors and personnel sluices. Cross-traffic is ignored, ensuring energy-efficient usage.

IMS 100 Pro

The IMS 100 Pro provides a new level of safeguarding by monitoring the entrance area to elevators. This reduces overall door-opening times and improves elevator efficiency.

CabSafe™

The 2019 North American Elevator Safety Code (ANSI A17.1-2019 / CSA B44-19) defines new and clarifies existing requirements for the means of detecting persons or objects between the doors (2D) or approaching the elevator (3D). CEDES CabSafe™ system, consisting of a Controller, a 2D light curtain and a 3D TOF sensor, can fulfill all these code requirements and more.

Positioning and control systems

APS

The APS is a contactless absolute positioning system for elevators. It supports speeds of up to 20 m/s and distances of up to 1,500 m. As SIL 3 rated, it can be used for safety-relevant functions.

iDiscovery

The iDiscovery is a powerful SIL 3 and EN 81-20/50 compliant safety supervisor unit. In conjunction with CEDES’ APS (Absolute Positioning System), it takes over safety-relevant functions of the elevator, including enhanced inspection functions for elevators with reduced headroom or pit (EN 81-21). The system features a pure electronic overspeed governor to trip an electrically activated safety gear.

Light curtains

GridScan/Pro SI

GridScan/Pro SI is a highly reliable SIL 2-certified safety light curtain with a serial interface for industrial doors. Certified with an EC-type examination, it can be used in any door. The serial interface allows for the integration of additional functions such as soft stop, increasing the door`s service life.

GridScan/Pro

GridScan/Pro is a highly reliable SIL 2-certified safety light curtain for industrial doors. Equipped with EC type examination certification, it can be used at any door. Thanks to its multi-output design and the changeable operating mode (from blanking to static), the GridScan/Pro can be integrated in all types of door control systems.

cegard/Mini-CC

The cegard/Mini-CC light curtain offers a major increase in the level of safeguarding of elevators doors thanks to its criss-cross beams, which remain active up to complete elevator door closure.

Light barriers

RAYTECTOR RAY-S (pull-in protection)

The safety photo eye is used for entrapment protection on industrial doors, mainly for rolling grills. An interruption of the light beam initiates a signal between emitter and receiver which interrupts the movement of the power operated door. The pull-in protection RAYTECTOR is suitable for absolute fitting dimensions between 1.5 m to 10 m. Emitter and receiver are inserted in compound-filled plastic housings. The respective 10.5 m length of the connector cables allow the direct connection to the control unit.

RAY-M

RAY-M was designed as a light barrier for a small mounting space. It generates the standard OSE signal and can be operated in combination with well known control units. The RAY-M DUO is a double beam light barrier for safeguarding of two parallel areas via one signal. Areas at two different heights, e.g. persons and trucks, can be monitored simultaneously with only one product (solution `D` acc. to EN 12453 possible).

RAY-N

RAY-N photo eyes are monitored sensors, using the same proven technology as the OPTOEYE. When the signal between emitter and receiver is interrupted, the sensor sends a signal to the operator to stop and reverse the door. These sensors are long range (13 m), yet are NEMA 1 rated for price-sensitive applications. Also, the versatility of threaded design allows for flush mounting (for example, within the guide of a rolling door) or mounting to a bracket for easy installation.

Reflective Sensors

RAY-RT

With its adaptable design, RAY-RT can be installed in the most challenging locations of door construction. It is designed for securing various points of the door and due to its compact size, it can even be integrated in the guide rail.

RDS 100

The RDS 100 radar sensor provides very reliable door activation. The sensor can be used for all automatic doors, thanks to his large detection area of 4 x 2 m at a mounting height of 2.2 m.

TLS 500

The TLS 500 is a versatile diffuse-reflective sensor suitable for any application where spot monitoring is needed. Its compact and elegant design allows it to be easily and discreetly integrated into any application.

Switches

ENTRYSENSE (ENS)

Wicket doors in panels of power operated sectional doors must be locked safely in their closing position prior to any operation of the sectional door. This is applicable to fully automated doors as well as to doors in hold-to-run mode. A safe contact must prevent the entire door from moving while the wicket door is not fully closed. ENTRYSENSE is available in three versions to work with different door control units.

Accessories

Rubber profiles

The hollow rubber profiles enclose the OSE safety light barrier. When the hollow rubber profile is deformed, the optical channel is interrupted, causing a dynamic safety signal to fail. This is detected by the control unit which interrupts the enable circuit. The potentially hazardous movement is halted.

Bumpers

Bumpers are used for long-term protection of horizontally mounted safety contact edges. In a closed state the door leaf sits on the bumpers. These protect the rubber profile and/or the inner optical closing edge device from damage. The installation height is selected to ensure that the hollow chamber containing the closing edge sensor is not deformed, but that the sealing flanges or the sealing chamber make tight contact with the floor.

Retainer

Most commercial doors are equipped with the proper retainer in order to install a rubber profile. For retro-fitting or door sections without the right retainer, VITECTOR by CEDES offers special retainers for installation of sensing edges.
To the top

Cookies

Close
We use cookies in order to optimally design and continuously improve our website. By continuing to use the website you consent to the use of cookies.

For further information about cookies please view our data protection statement.
Close